Instances in NODAS_HP LIBRARY
<<back to hp design help page

The instances included in NODAS_HP library are listed below:

anchor
beam_0010
beam_0011
beam_0100
beam_0101
beam_0110
beam_0111
beam_1000
beam_1001
beam_1010
beam_1011
beam_1100
beam_1101
beam_1110
beam_1111
beamcell_14
comb_1111_1
comb_1111_2
comb_diff_1111_1
comb_diff_1111_2
frame_1000
layout_origin
plate_1000
plate_1000_fc
plate_1000_lr
plate_1000_tb
plate_1000x
plate_1000y

 

ANCHOR

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l and w
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns;
  • l denotes a direction perpendicular to a side where the anchor is connected to another element.
  • w denotes a direction parallel to a side where the anchor is connected to another element.

 

BEAM_0010

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l, w, angle
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.

BEAM_0011

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l, w, angle
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.

BEAM_0100

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l, w, angle
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.

BEAM_0101

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l, w, angle
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.

BEAM_0110

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l, w, angle
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.

BEAM_0111

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l, w, angle
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.

BEAM_1000

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l, w, angle
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.

BEAM_1001

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l, w, angle
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.

BEAM_1010

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l, w, angle
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.

BEAM_1011

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l, w, angle
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.

BEAM_1100

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l, w, angle
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.

BEAM_1101

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l, w, angle
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.

BEAM_1110

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l, w, angle
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.

BEAM_1111

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 l, w, angle
DESIGN TIPS
  • values for l and w end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.

beamcell_14

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 entry 1
DESIGN TIPS
  • entry 2

Comb_1111_1

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 finger_width, finger_length,
angle, overlap, gap, fingers,
truss_width_a, truss_width_b,
wing_length_a, wing_length_b
DESIGN TIPS
  • All properties except "angle" and "finger" are required to end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.
  • The rotor (right side) has a number of fingers equal to the property value of "fingers", while the stator (left side) has 1 more finger.

Comb_1111_2

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 finger_width, finger_length,
angle, overlap, gap, fingers,
truss_width_a, truss_width_b,
wing_length_a, wing_length_b
DESIGN TIPS
  • All properties except "angle" and "finger" are required to end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.
  • The rotor (right side) has a number of fingers equal to the property value of "fingers", while the stator (left side) has 1 more finger.

Comb_diff_1111_1

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 finger_width, finger_length,
angle, overlap, gap, fingers,
truss_width_a, truss_width_b,
wing_length_a, wing_length_b
DESIGN TIPS
  • All properties except "angle" and "finger" are required to end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.
  • The rotor (right side) has a number of fingers equal to the property value of "fingers", while the stator (left side) has 1 more finger.

Comb_diff_1111_2

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 finger_width, finger_length,
angle, overlap, gap, fingers,
truss_width_a, truss_width_b,
wing_length_a, wing_length_b
DESIGN TIPS
  • All properties except "angle" and "finger" are required to end with the letter "u" denoting microns,
  • angle can be either "0" - terminals of type "m" located on the left side of the symbol or "90"- terminals of type "m" located on the bottom of the symbol.
  • The rotor (right side) has a number of fingers equal to the property value of "fingers", while the stator (left side) has 1 more finger.

frame_1000

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 entry
DESIGN TIPS
  • entry

LAYOUT_ORIGIN

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES
DESIGN TIPS defines (0,0) layout co-ordinates and technology library for layout generation therefore it has to be taken from NODAS_poly library.,

PLATE_1000

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 entry
DESIGN TIPS
  • entry

PLATE_1000_fc

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 entry
DESIGN TIPS
  • entry

PLATE_1000_lr

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 entry
DESIGN TIPS
  • entry

PLATE_1000_tb

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 entry
DESIGN TIPS
  • entry

PLATE_1000x

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 entry
DESIGN TIPS
  • entry

PLATE_1000y

SYMBOL
PROPERTY
WINDOW

 
REQUIRED
PROPERTIES		 entry
DESIGN TIPS
  • entry

Revised by Kai He ( khe@ece.cmu.edu ), Mar 5 2000.