The instances
included in NODAS_HP library are listed below:
anchor
beam_0010
beam_0011
beam_0100
beam_0101
beam_0110
beam_0111
beam_1000
beam_1001
beam_1010
beam_1011
beam_1100
beam_1101
beam_1110
beam_1111
beamcell_14
comb_1111_1
comb_1111_2
comb_diff_1111_1
comb_diff_1111_2
frame_1000
layout_origin
plate_1000
plate_1000_fc
plate_1000_lr
plate_1000_tb
plate_1000x
plate_1000y
ANCHOR
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l and w |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns;
- l denotes a direction perpendicular to a side where the anchor is connected to another
element.
- w denotes a direction parallel to a side where the anchor is connected to another element.
|
BEAM_0010
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l, w, angle |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
|
BEAM_0011
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l, w, angle |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
|
BEAM_0100
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l, w, angle |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
|
BEAM_0101
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l, w, angle |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
|
BEAM_0110
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l, w, angle |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
|
BEAM_0111
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l, w, angle |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
|
BEAM_1000
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l, w, angle |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
|
BEAM_1001
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l, w, angle |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
|
BEAM_1010
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l, w, angle |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
|
BEAM_1011
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l, w, angle |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
|
BEAM_1100
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l, w, angle |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
|
BEAM_1101
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l, w, angle |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
|
BEAM_1110
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l, w, angle |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
|
BEAM_1111
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
l, w, angle |
DESIGN TIPS |
- values for l and w end with the letter "u" denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
|
beamcell_14
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
entry 1
|
DESIGN TIPS |
|
Comb_1111_1
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
finger_width, finger_length,
angle,
overlap, gap, fingers,
truss_width_a, truss_width_b,
wing_length_a, wing_length_b |
DESIGN TIPS |
- All properties except "angle" and "finger" are required to end with the letter "u"
denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
- The rotor (right side) has a number of fingers equal to the property value of "fingers", while the stator (left side) has 1 more finger.
|
Comb_1111_2
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
finger_width, finger_length,
angle,
overlap, gap, fingers,
truss_width_a, truss_width_b,
wing_length_a, wing_length_b |
DESIGN TIPS |
- All properties except "angle" and "finger" are required to end with the letter "u"
denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
- The rotor (right side) has a number of fingers equal to the property value of "fingers", while the stator (left side) has 1 more finger.
|
Comb_diff_1111_1
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
finger_width, finger_length,
angle,
overlap, gap, fingers,
truss_width_a, truss_width_b,
wing_length_a, wing_length_b |
DESIGN TIPS |
- All properties except "angle" and "finger" are required to end with the letter "u"
denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
- The rotor (right side) has a number of fingers equal to the property value of "fingers", while the stator (left side) has 1 more finger.
|
Comb_diff_1111_2
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
finger_width, finger_length,
angle,
overlap, gap, fingers,
truss_width_a, truss_width_b,
wing_length_a, wing_length_b |
DESIGN TIPS |
- All properties except "angle" and "finger" are required to end with the letter "u"
denoting microns,
- angle can be either "0" - terminals of type "m" located on the left side of
the symbol
or "90"- terminals of type "m" located on the bottom of the symbol.
- The rotor (right side) has a number of fingers equal to the property value of "fingers", while the stator (left side) has 1 more finger.
|
frame_1000
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
entry |
DESIGN TIPS |
|
GND_ANCHOR
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
entry |
DESIGN TIPS |
|
LAYOUT_ORIGIN
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
|
DESIGN TIPS |
defines (0,0) layout co-ordinates and technology library for layout
generation therefore it has to be taken from NODAS_poly library., |
PLATE_1000
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
entry |
DESIGN TIPS |
|
PLATE_1000_fc
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
entry |
DESIGN TIPS |
|
PLATE_1000_lr
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
entry |
DESIGN TIPS |
|
PLATE_1000_tb
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
entry |
DESIGN TIPS |
|
PLATE_1000x
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
entry |
DESIGN TIPS |
|
PLATE_1000y
SYMBOL |
|
PROPERTY
WINDOW |
|
REQUIRED
PROPERTIES |
entry |
DESIGN TIPS |
|
|